Maintenance And Storage - Parkside Performance Ppfsa 40-Li B2 Originalbetriebsanleitung

GB MT
entire period of use of the ma-
chine.
• The use of the machine under
bad­weather­conditions,­espe-
cially­in­case­of­lightning­risk,­
must be avoided.
• Warning! Do not touch any
moving dangerous parts before
the battery has been removed
and the moving dangerous
parts have come to a complete
stop.
•­ Caution,­risk­of­injury­from­cuts­
on hands and feet.
• Stop using the machine when
persons,­above­all­children,­and­
house pets are in the vicinity.
• Use the machine only in day-
light­or­with­good­artificial­light-
ing.
• Always keep your hands and
feet away from the cutting
equipment,­above­all­when­you­
switch the motor on.
• Always disconnect the machine
from the power supply (i.e. re-
move­the­removable­battery):­­
1) whenever leaving the machi-
ne unattended;
2) before removing blockages;
­3)­before­checking,­cleaning­or­
modifying the machine;
4) after contact with a foreign
object;
5) if the machine begins to vib-
rate in an unusual way.
• Be careful to avoid injuries to
your feet and hands by the cut-
ting unit.
• Make sure to keep the ventila-
tion openings free of foreign
objects.
• Never install metallic cutting ele-
ments.
48
• Never use the machine with
damaged or missing protective
equipment.
• Avoid an abnormal body pos-
ture.­Ensure­secure­footing­at­all­
times to maintain balance when
working on slopes.
• Go slowly. Do not walk with the
device in your hand.
• Always wear sturdy shoes and
long trousers during operation
of the machine.
• In the case of an accident
or malfunction during op-
eration, the device must
be switched off imme-
diately. Injuries must be
properly treated or medi-
cal assistance sought. Read
the­„Trouble­shooting"­section­to­
correct any malfunctions or con-
tact­our­Service­Centre.
• Do not use any accessories
that are not recommended
by PARKSIDE. This can result
in­electric­shock­or­fire.
MAINTENANCE AND
STORAGE
• Remove the removable battery
before carrying out mainte-
nance or cleaning work.
• Use only spare parts and ac-
cessories supplied and recom-
mended by the manufacturer.
• The machine must be checked
regularly­and­maintained.­Have­
the machine repaired in a li-
censed workshop.
• When the machine is not being
used,­store­it­out­of­the­reach­of­
children.