Working With The Mower; Starting/Stopping The Engine - Fuxtec Fx-Rm5170Agile Original Bedienungsanleitung

Working with the mower

Starting/stopping the engine

When cold starting, first press the primer pump before tightening the throttle grip on the upper spar.
Temperature
<0℃
0℃ - 10℃
10℃ - 20℃
>20℃
Important note: not every model is equipped with a primer pump.
To start the engine, tighten the handle for the engine cable to the handle of the upper spar.
If your model has rear-wheel drive, you should not hold the handle for the rear-wheel drive during
the starting process. Otherwise, the rear wheels will start moving immediately.
ORIGINAL USER MANUAL FUXTEC FX-RM5170agile rev01
Pressing the primer
pump
3x - 4x
2x - 3x
1x - 2x
1x
45