Werbung
Verfügbare Sprachen
Verfügbare Sprachen
75--85
85--99
7. Depth indication
The depth indication is accurate for coin-sized objects. Large objects or
irregularly-shaped objects will yield less reliable depth readings. If
sweeping in the same place several times, the depth displays the same,
it is a more accurate detection. If the depth indication varies, try to
change the angle of the sweep. There also may be more than one
target present.
8. PINPOINT
When detecting in motion mode, and you should persistently move the
search coil, so although you find the region that has buried metals, it's
not easy to determine the exact location, it makes digging difficult. At
this time, you should refer to PINPOINT mode.
a. Press the PINPOINT button, the PINPOINT cursor is lit, the depth
cursor will display full scale, and the detector will sound a low
single-frequency tone, the sensitivity is at the highest state.
b. Let the search coil approaches the ground, move the search coil
slowly in the area where you found the target. In the position where
the single-frequency tone turns louder, and the signal strength cursor
begins to appear. Continue moving the search coil slowly until the
sound becomes louder, the signal strength cursor is full scale, and the
depth cursor is at lowest possible. You have now locked the target
location roughly.
c. If the area with the strongest signal is larger and the location is
not accurate enough, you can keep the location of the search coil
bottle
Copper,
aluminum
Silver
10￠
25￠,1＄
２０
2￡,2P
Werbung
