DR.ÖTEK MT-XR Benutzerhandbuch Seite 22

CORRECT WAY OF SWEEPING
Incorrect search coil angle VS correct search coil angle
Incorrect way of sweeping VS correct way of sweeping
It is important to keep the search coil parallel to the ground in order to
get accurate results.
The serach coil must be parallel to the ground at all the time.
Shaft height is correct
Adjust the height of the shaft so that
you are standing in an upright position,
and your arm is relaxed and the search
coil is approximately 2-3cm(1.18 inches)
above the ground.
１８