Werbung
Verfügbare Sprachen
Verfügbare Sprachen
QUICK-START
1. Lay the detector flat using the prop behind the arm bracket.
Lay the detector on a wooden or plastic table and allow the search coil
to stretch out of from the table by about 30cm, keep away from walls,
ceilings, and floors, turn off all kinds of electrical appliances that will
cause electromagnetic interference, remove watches and rings from
hands. (see Fig.9)
Fig.9
2. Power on the detector.
Press the POWER button, the detector will sound two moo tones, and
all LCD patterns will be lit for a moment. The detector is set by default
to the last shutdown state.
3. ALL METAL mode test
Press the MODE button, the A-M cursor will light. Sweep six sample
１０
Werbung
