Service Data; Installation - AEG BP8615101 Benutzerinformation

Problem
Steam and condensation
settle on the food and in the
cavity of the oven.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".

13.2 Service data

If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. INSTALLATION

WARNING!
Refer to Safety chapters.
Possible cause
You left the dish in the oven
for too long.
The demo mode is activa-
ted.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
ENGLISH
Remedy
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
1. Deactivate the appli-
ance.
2. Touch and hold
the appliance activates
and deactivates.
3. Touch and hold
at the same time un-
til an acoustic signal
sounds. "Demo" goes
out.
33
until
and