Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TROUBLE SHOOTING
Issue
The buzzer does
not beep, or the
impeller does not
work when the
cleaner is out of
water.
The buzzer still
beeps, or the
impeller does not
work when the
cleaner is in the
water.
The cleaner
does not change
direction when
hitting the pool
wall.
The LED indicator
does not light up
when the charger is
plugged in.
The cleaner does
not vacuum the
entire pool floor.
PIÈCES DÉTACHÉES
SAFETY ADVICE
F.A.Q.
Scénario
-
-
-
The flipper does not
flip forward when
approaching the
pool wall.
-
The cleaner keeps
bouncing at the
same direction,
some areas are
always missed.
The pool filtration
system is on.
Possible reason
Battery level is low.
Internal fault
Internal fault
The flipper is stuck
and does not turn
freely.
Faulty charger
Improper running
pattern setting
Irregular pool shape
Water current inside
the pool affects
the running of the
cleaner.
40
Solution
Recharge the
battery.
Call customer
service
Call customer
service
Hose off the dirt
around the hinge
of the flipper. Make
sure the flipper
turns freely.
Call customer
service and request
for a replacement
charger.
Try different running
patterns. Refer to
the "Adjustment of
running pattern"
section of the
manual.
Turn off the pool's
filter pump when
using this product.
Werbung
