CLEANING AND MAINTENANCE
The product is maintenance-free, except for occasional cleaning. You can use a lint-free, slightly dampened
cloth for cleaning. Disconnect the product from power before cleaning. Refer all servicing to qualified
personnel. The LEDs are permanently installed; they cannot be replaced.
PROTECTING THE ENVIRONMENT
Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a
disposal which is not harmful to the environment. Devices marked with this symbol must not be
disposed of as household waste. Contact your retailer or local authorities for more information.
Remove any inserted batteries and dispose of them separately from the product.
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited. You may return
your used batteries free of charge to collection points in your municipality and anywhere where
batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly,
you contribute to the protection of the environment.
TECHNICAL SPECIFICATIONS
Power supply:
IP classification:
Protection class:
Power connection:
Battery pack type:
Battery pack:
Lamp type:
LED:
Flash rate:
Cooling:
Control:
Beam angle (1/2 peak):
Beam angle (1/10 peak):
Housing color:
Display type:
Dimensions:
Weight:
Noise classification:
Remote control
Battery:
All information is subject to change without prior notice. © 22.01.2024
100-240 V AC, 50/60 Hz
5 V 1.6 A
IP65
Protection class III
Battery/battery pack
Mains input via USB C (M) mounting version
1 x 12.6 V, 3200 mAh, 40,32 Wh
Battery operation up to 9h depending on program used
Recharging time 5h
LED lamp
4 x 4 W 4in1 QCL RGBW (homogenous color mix)
1 - 20 Hz
Passive convection cooling
Sound to light via Microphone; stand-alone; IR remote
control
15°
30°
Black
4 digit 7-segment LED display
Length: 10 cm
Width: 11 cm
Height: 12 cm
1.25 kg
Class 0 (no noise at all)
1 x button cell CR2025
19/20
00150545, Version 1.0