Mode
Battery charge status
IR remote control
Color mix
Strobe
Preset colors
Color change
Color fade
Pulsing color change
Sound control
Stand-alone mode
Color mix
Menu options r, G, b and u generate a mixed color by intensity control of the red, green, blue and white
colors. The device will constantly emit the color adjusted. Press the MENU button so many times until r for
the color red and the corresponding intensity value is indicated in the display. Then use the buttons UP and
DOWN to adjust the desired intensity. Adjust the other primary colors in the same way.
Strobe effect
Menu item F activates the strobe effect for all stand-alone operating modes. The flash frequency is
adjustable. Press the MENU button so many times until FXXX is indicated in the display. Use the UP and
DOWN buttons to adjust the flash frequency (010 = slow, 255 = fast). Confirm the speed selection with the
ENTER button.
Preset colors
In color mode CL the device will constantly emit one of 8 preset color combinations. Press the MENU button
so many times until CLXX is indicated in the display. Use the UP and DOWN buttons to set the desired color:
Display
CL01
Red
CL02
Green
CL03
Blue
CL04
White
CL05
Yellow (red and green)
CL06
Magenta (red and blue)
CL07
Turquoise (green and blue)
CL08
White (all LEDs on)
Confirm the color selection with the ENTER button.
Display
U_XXX
Digits
IrYE
IrYE
Irno
rXXX
r0-255
GXXX
G0-255
bXXX
b0-255
uXXX
u0-255
F000-009
FXXX
F010-255
CLXX
CL01-08
CCXX
CC00-99
dEXX
dE00-99
CPXX
CP00-99
SUnX
SUn0-9
Color
16/20
Function
100 - battery fully charged
0 - battery discharged
IR remote control on
IR remote control off
Red dark > bright
Green dark > bright
Blue dark > bright
White dark > bright
No function
Strobe effect with increasing speed
Constant lighting in one of 8 colors
Color change with increasing speed
Color fade with increasing speed
Pulsing color change with increasing
speed
Sound controlled color change with
decreasing microphone sensitivity
00150545, Version 1.0