Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Additional Functions
10
ADDITIONAL FUNCTIOS
10.1 Adjusting Fade In Time for the Color Channels
It is possible to adjust a fade in time for chases affecting the RGBW color channels 1-4 and the dimmer channel. When
actuating a sliding control, the corresponding channel is moved slowly and steadily to its target value. The controller
automatically creates all necessary intermediate values. Keep the PAGE button pressed and simultaneously adjust the
fade in time with the PAN wheel between 0-30 seconds. When turning the wheel, the display indicates the selected value
in the lower line, e.g. <Fade 8.5S< for a fade in lasting 8.5 seconds. The fade in feature can be assigned to each fixture
individually. The assignment can be made in the system settings under <01. Patch fixture< ( section 6.7).
10.2 Blackout Function
With the blackout function it is possible to blackout a scene or chase completely. Current fadings and chases are not
stopped by the blackout function, they continue <in the dark= in the meantime.
1
With the BLACKOUT button this function is switched on: The LED above the button flashes and all control
channels are set to the output value zero.
2
By pressing the BLACKOUT button again, the function stops: The LED is extinguished and all channels return to
their pervious output values.
3
In the system settings, it is possible to define whether all control channels react to the BLACKOUT button or only
the dimmer control channel.
www.eurolite.de
58
Werbung
