Operation - LGB Mogul Bedienungsanleitung

Ernst Paul Lehmann Patentwerk
Reparatur-Abteilung
Saganer Straße 1-5
D-90475 Nürnberg
DEUTSCHLAND
Tel.: (0911) 83707 0
Telefax: (0911) 83707 70
Die Einsendung erfolgt zu Ihren
Lasten.
Hinweis: Informationen zur LGB und
zu LGB-Vertretungen in aller Welt fin-
den Sie im Internet unter www.lgb.de
VORSICHT! Dieses Modell ist nicht
für Kinder unter 8 Jahren geeignet.
Das Modell hat kleine, scharfe und
bewegliche Teile. Am Lokgestänge
besteht Quetsch- und Klemmgefahr!
Verpackung und Bedienungsanleit-
ung aufbewahren
Artikel, technische Daten und Liefer-
daten können sich ohne Voran-
kündigung ändern. Einige Artikel
sind nicht überall und über alle
Fachhändler erhältlich. Einige Ab-
bildungen zeigen Handmuster. LGB,
LGB of America, LEHMANN und der
LGB TOYTRAIN-Schriftzug sind ein-
getragene Marken der Firma Ernst
Paul Lehmann Patentwerk, Nürnberg,
Deutschland. Andere Marken sind
ebenfalls geschützt. © 2006 Ernst
Paul Lehmann Patentwerk.
8
GB
USA
Mogul Locomotive
THE PROTOTYPE
The Mogul locomotive is an American
classic. During the late 1800s and
early 1900s, more than 10,000 of
these versatile locos were built for
freight and passenger service through-
out North America. The term "Mogul"
refers to the "2-6-0" wheel configura-
tion of these locos: two small guide
wheels followed by six large driving
wheels and no trailing wheels.
THE MODEL
This detailed replica features:
- weather-resistant construction
- opening smokebox door
- DCC interface for installation of
MTS Loco Decoder III (LGB 55027)
- four-way power control switch
- protected gearbox with seven-pole
Bühler motor
- six powered wheels
- one traction tire
- ten power pickups
- voltage stabilization circuit
- smoke generator
- automatic directional front lantern
- one multi-purpose socket
- length: 665 mm (26.2 in)
- weight: 4600 g (10.1 lb)
THE PROGRAM
This LGB model is part of the com-
prehensive LGB program of more
than 600 quality G-scale trains, track
sections and accessories. To learn
more about the many other products
in the LGB program, see the big LGB
catalog or visit www.lgb.com

OPERATION

Preparation
Attach the engine to the tender:
- Plug the wiring cable (Fig. 1) from
the engine into the socket on the
tender.
- Slip the coupling hook on the
engine over the loop on the tender.
Attention! The cable can be damaged
by rough handling. When discon-
necting the tender, do not pull on the
cable. Pull on the plug only.
Operating Modes
This model has a four-way power
control switch mounted inside the
cab (Fig. 2, 3):
Position 0: All power off
Position 1: Power to lights and
smoke generator
Position 2: Power to motor, lights
and smoke generator
Position 3: Same as Position 2 (fac-
tory pre-set)
Attention: Do not connect this model
to other loco models with different
starting characteristics. This can
damage the internal gearing.
Lighting
The front lantern on the loco illumi-
nates when the loco moves forward.
The model has a "flat" multi-purpose
socket, with a removable cover, on
the rear of the tender (Fig. 4). This
socket can be used to provide track
power to cars with lighting or sound
electronics.
To remove the cover of the socket,
pull it straight out. If the cover is
tight, gently use a small straight
screwdriver to pry it out. (Do not pull
out the rectangular outer housing.)
Smoke Generator
This model is equipped with a smoke
generator. A small supply of LGB
9