Information About Operation; Service And Maintenance - LGB 21000 Bedienungsanleitung

Operating Mode Selector (in the engineer's cab, Figure 1)
3-Step Operating Mode Selector
Pos. 0 Locomotive standing on the track with no current
Pos. 1 Lighting turned on
Pos. 2 Motors and lighting turned on (normal operation)
Pos. 3 Motors and lighting turned on (normal operation)
Lubrication
Oil the axle bearings now and then with a drop of LGB
maintenance oil (item no. 50019).
Changing Light Bulbs (interior lighting)
To replace the interior light bulbs, the model must be disas-
sembled. We recommend installation of these parts at an
authorized LGB service station.
Changing Light Bulbs (lower/upper lights)
Carefully pry the lens away from the lantern. Using
tweezers, remove and replace the bulb. Reassemble.
Changing Traction Tires
- Using a screwdriver, carefully lift the old traction tire
from the groove in the wheel.
- Mount the new traction tire and press it into the groove.
Spare Parts
63120 Current pickup carbon brushes with sleeves, 8 pieces
63218 Pickup shoe contacts, 2 pieces
129333 Lyra-pantograph
68511 Clear plug-in light bulb, 5 volts, 10 pieces
69104 Traction tires 37.5 mm / 1-15/32", 10 pieces
7