HMS LOOP14 Bedienungsanleitung Seite 27

One windows display:
1." incline"window: display current incline value.
2. " pulse/ Calorie" window; display current pulse value and the calorie the exerciser consumed.
3. " time/ program" window: display current exercise time and the program used currently.
4. " distance/ mode" window: display current exercise distance value and current mode used.
5. " pedometer" window: display current steps value.
6. " speed" window: display current exercise speed value.
Two, key functions
1. " start" is start button, when the power is on and safety key is on, press this button, can start the treadmill.
2. " incline3" incline 3 shortcut key: can set incline quickly.
3. " incline5" incline 5 shortcut key: can set incline quickly.
4. " program" is program button: at standby mode, pressing this button can choose in loop"0:00"、"P1-P2-
P3......P8、U1-U2-U3、"mode; manual mode is the system default operation mode, the manual mode default speed
is 1.0KM/H.("0:00" is manual mode,P1-P8 is built-in program,U1-U3 is user program.)
5." mode" is mode selection button: pressing this button can choose in loop"0：00"、"30：00"、"5.0"、"100"
（"0：00" is manual mode,"30:00 is time countdown mode,"5.0" is distance countdown mode,"100" is calorie
countdown mode.)when choose different modes, use handrail speed up and down button to set corresponding
countdown value, after setting, press "
6." speed 3"speed 3 shortcut key: can set the speed quickly.
7. " speed 5"speed 5 shortcut key: can set the speed quickly.
8. " stop" is stop button: can stop the treadmill operation.
Three, instant start (manual mode):
1.Turn on the power, put the safety lock in the safety lock place on the meter.
2.Press" start", system enter into 3 seconds countdown, the buzzer makes sound, at the same time"
program" windows display the countdown numbers, after the 3 seconds countdown, the treadmill start to run by
1.0 km/h speed.
3.After start, can adjust treadmill speed and incline with handrail button according to needs; also can use "
incline 3" 、"
incline 5"、"
directly.
Four, operation during the exercise
1.Use right handrail-to lower treadmill operation speed.(0.2km/h per time)
2.Use right handrail + to increase treadmill operation speed.(0.2km/h per time)
3.Use left handrail-to lower treadmill operation incline.
4.Use left handrail + to increase treadmill operation incline.
5.Pressing stop button makes the treadmill slow down to stop.
6.When the exerciser hold the pulse bars for 5 seconds, the pulse icon gets lit, "
pulse data.
Five, manual mode
1.At the standby state, directly press"
other windows start to count in forward direction from 0,pressing"both sides handrail button" changes incline and
speed.
start" button can start treadmill.
speed 3" 、"
speed 5" shortcut keys to adjust the treadmill speed and incline
start" button, the treadmill start to run by 1.0km/h speed、0% incline;
time/
pulse/ calorie" display the