Power Line - Hms Loop14 Bedienungsanleitung

Assembly instruction
The followings are the parts pictures of a whole treadmill. When you open the carton, you will find the below spare parts.
Installation tools:
20.L shape 5#Wrench

96.power line

128.safety key
Install
First Step:
Hold the upright with right or left hand. Press the foot lever with foot or hand,
until you hear a sound of "ka", then left the uprights till you hear the sound of
"ka". Lightly shake the uprights, loosen hands after confirmation that the
uprights are locked tightly.
Second Step:
Pull the pad bracket to the left after turning upward the pad bracket
according to the arrow direction in the drawing. Shake to and fro with
hands, you can use it after confirmation that it is locked tightly. To fold
the bracket pull it to the right side and bend it
Third Step:
Put the safety key in the treadmill corresponding hole.
55.Silicon oil
103.MP3 line
Notice:You can only plug in the power,after the confirmation that
treadmill is assembled completely according to the assemble
requirements and there is nothing missing.Please read carefully
corresponding instructions on the later part of this manual,when you
operate and use the treadmill.
75.screw
M6*12 4PCS
114.handrail 2PCS