Lenz Digital plus LF100XF Information Seite 44

44
56 [1-255] Flashing frequency for function outputs C and D. The higher the value
in the CV, the lower the frequency.
If you want to set a specific frequency, the required value can be
calculated as follows:
0,064
Settings for output B
57
1 Not used
2-8 Like CV51, affects output B
[0-255] Determines the brightness while dimming output B.
58
255 is maximum brightness, 0 is off.
1
=
∗
[frequency (Hz)]
Value(CV56 )
Information LF100XF
[15]
[0]
[64]