Lenz Digital plus LF100XF Information Seite 39

List of CVs supported by the LF100XF
The left column shows the CV number, the next column the permitted range of values or the list of
the meanings of the individual bits. Decimal values are stated in square brackets. The column
„Meaning" describes the CV or the effect of the individual bits; the last column shows the ex-works
setting.
CV Value /
Bit
[1-99] Basic address
1
7 - Version number
Here you can read out the version number of the locomotive decoder.
This position can only be read, not rewritten.
- Manufacturer identification
8
The value in this register states the manufacturer of the decoder; Lenz
Elektronik carries the number 99. This position can only be read, not
rewritten.
192-231 Extended locomotive address, higher Byte
17
0-255 Extended locomotive address, lower Byte
18
19 1-99 Multiple traction address:
In this CV the multiple traction address is entered if you integrate the
LF100XF into a multiple traction. This is done automatically while
assembling the multiple traction, as is the deletion of the address when
the MTR is removed.
Meaning
39
def.
[3]
[10]
[99]
0
0
0