Lenz Digital plus LF100XF Information Seite 32

32
Connections of the LF100XF
The LF100XF has a total of 7 connecting cables:
Cable colour Meaning
Red Track connection 1
Black Track connection 2
Blue Common connection for the
functions
Basic connection of functions
The individual functions are all connected in accordance with the same principle: from the decoder
output to one pole of the function, from the other pole to the blue cable of the decoder. Functions at
the outputs C and D can alternatively be connected to one of the track connections (red / black). If
a function is to be connected to a certain polarity, please make sure that the function output is the
negative pole and that the blue cable is the positive pole. If you want to connect LEDs to the
LF100XF, don't forget tha appropriate Resistor.
You can install several LF100XFs in the same vehicle or else you can use the LF100XF in
addition to a locomotive decoder. In this case you will have to make sure that you can
program the decoders independently, therefore you might have to carry out the programming
before installation.
Cable colour Meaning
White Function output A
Yellow Function output B
Green Function output C
Purple Function output D
Information LF100XF