Argo SPHERA Gebrauchsanleitung Seite 33

3. "+" and "-" BUTTONS
Setting the Timer
Press the "+" and "-" buttons to set the Timer (the LED lights up on the control panel after selecting the Timer function
with the Fan Speed button). Each time the buttons are pressed, the adjustment step is 0.5 hours up to 10 hours, then
the adjustment step changes to 1 hour with each press. The adjustment range is from 0.5 to 24 hours.
If 00 is shown on the display, the Timer function will be canceled automatically and if no setting is made within 5
seconds, the Timer function will activate automatically.
To cancel the Timer function, set the time to 00 or press the ON/OFF button.
Temperature setting
Press the "+" and "-" buttons to set the temperature (each press corresponds to 1 °C).
The temperature can be adjusted from 16°C to 32°C
To change the display from °C to °F, press the + and - buttons simultaneously for 3 seconds.
Activation of Timer from the remote controller
With the air conditioning on, press this button to deactivate the TIMER function, with the air conditioning off to activate
it. When the button is pressed, the display will show the words "ON (OFF)" flashing. Press the "+" and "-" buttons
to set the timer, with each press the selection interval will increase or decrease by 0.5 h. The range that can be set
is 0.5-24 h. Press the "TIMER" button again to activate the function, the "ON (OFF)" symbol will stop flashing. If the
"TIMER" button is not pressed within 10 seconds while the "ON (OFF)" symbol is flashing on the display, the TIMER
function will be cancelled. If the TIMER function is active, pressing this button will deactivate it.
4. MODE SELECTION BUTTON
Press this button to select the different operating modes, according to this sequence:
Auto - Cooling - Dehumidification - Ventilation
The LEDs light up according to the selection made.
SLEEP function (can only be activated by remote controller)
Press this button on remote controller to to activate or deactivate this function
After setting the Sleep mode, in the cooling function, the temperature will increase by 1 °C in one hour, then it will
automatically increase by 1 °C again after another hour.
The ventilation speed will automatically switch to the lowest level available to guarantee maximum silent operation
during night sleep. After 10 hours of operation in SLEEP mode the air conditioner returns to its previous functions and
turns off automatically. This mode cannot be activated in ventilation and auto modes.
Temperature display function °C/F (can only be activated by remote controller)
Press this button on the remote control to change the temperature display from °C to °F.
Child Lock function (can only be activated by remote controller)
Press the DRY and MODE buttons simultaneously for 3 seconds to activate or deactivate the child lock. When this
function is activated the icon appears on the remote control display.
Memory function
In the event of a blackout, when the power supply is restored the unit will resume operating according to the last
settings. The compressor resumes operation after 4 minutes.
V 01/24 33