Cleanmaxx Z 00110 Gebrauchsanleitung Seite 20

EN
Attaching / Removing the Floor Cloth
Attaching / Removing the Carpet Glider
Use the carpet glider (5) for steam-cleaning carpets.
18
Unwinding / Winding Up the Mains Cable
1. Push the mains cable into the cable holder (9).
20
• To detach the cleaning foot, press the locking lug and as
you do so pull the steam nozzle off.
• One side of the fl oor cloth (4) has Velcro fasteners on it.
Attach them to the bottom of the cleaning foot (3) and
press the fl oor cloth on fi rmly.
• After use, simply detach the fl oor cloth from the cleaning
foot.
• Place the carpet glider on the fl oor and insert the cleaning
foot (with fl oor cloth) into the mounts of the carpet glider.
• To remove the carpet glider, hold down the release but-
ton (18) of the carpet glider with the tip of your shoe and
pull the cleaning foot out of it.
2. Pull the upper hook for winding up the cable (17) away
from the handle (8) slightly and rotate the hook so that it
points upwards.
3. Wind the mains cable around the upper and lower (16)
hook for winding up the cable.
4. To quickly unwind the mains cable, pull the upper hook
away from the handle slightly and turn it downwards.