4. Control panel
The control panel is on the top cover of the device and has four control lamps and a
regulating knob to switch the device on and off and to adjust the degree of humidity.
The function of each control lamp is described briefly below it.
Green light "FULL" : when this light is turned on, the device stops, since the
container with condensed water is full.
Red light: "POWER" : indicates that the plug is connected to the power supply and
the device is being supplied with electricity.
Red light "WORKING" : is turned on, if the hygrometer releases the operation of the
dehumidifier. If the lamps "DEFROST" and "FULL" are switched off, the compressor
is running.
Red light: "DEFROST" (Pause) indicates that the compressor is ready to be
switched on. This takes place each time the device is switched on and during
defrosting, which occurs in cycles.
compressor
high pressure
low pressure
Diagram of the cooling circuit
17
condenser
capillaries
EN