Menüstruktúra - Involight Trinity150Led Bedienungsanleitung

4.2 Menüstruktúra:
Mode
Address
Fixture
Menu
Address Setting
Standard
Mode
Channel Mode
Extend Mode
Invert Pan
Pan/Tilt Setting
Invert Tilt
Swap Pan-
Tilt
DMX addressing.
a) Press the (Enter) key until "DMX Address" is
displayed.
b) Press the ▲ (Up) or ▼ (Down) button to select the
desired address.
c) As soon as the correct address is shown on the
display, confirm with the (OK) key
d) Press the (Return) key to exit the selection without
saving.
This allows you to select your desired DMX channel
mode.
a) Press the (Enter) key until "Channel Mode" is
displayed.
b) To select the desired DMX mode, press the ▲ (Up) or
▼ (Down) button.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Pan-tilt inversion.
a) Press the (Enter) key until "Pan Invert" or "Tilt Invert"
is displayed.
b) Press the ▲ (Up) or ▼ (Down) button until "Yes" or
"No" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
The PAN and Tilt channels can be swapped under
PAN / TILT SWAP.
a) Press the (Enter) key until "Swap Pan-Tilt" is
displayed.
b) Press the ▲ (Up) or ▼ (Down) button until "On" or
"Off" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
67
Description