Connections In Dmx Mode „Dmx - Involight Trinity150Led Bedienungsanleitung

4.4 Connections in DMX mode „DMX":
From a cable length of 300m or to 32 connected DMX devices, the signal should be amplified by a DMX splitter /
repeater (eg Involight DMXS4, DMXS6 or DMXS8) to ensure error-free data transmission.
IMPORTANT: The last device in a DMX chain should have a terminator connected to terminate the chain. DMX
terminators are commercially available, but can also be built yourself. A 120 ohm resistor must be soldered in an XLR
plug between the two poles (+ and -).
DMX connectors:
33