Master-Slave Mode; Stand-Alone Mode; Part Dmx-Assignment - Involight Trinity150Led Bedienungsanleitung

4.5 MASTER-SLAVE mode:

When you configure a group of devices in the "Master / Slave" mode, the first device controls the others and allows an
automatic or music-controlled and synchronized show. This feature is especially useful for starting a show without great
programming. Connect the DMX output of the master device to the DMX input of the first slave device. Then, connect
the DMX output of the first slave device to the DMX input of the second slave device, and so on.

4.6 STAND-ALONE mode:

A TRINITY150LED can also be used in stand-alone mode without a DMX controller. Disconnect Trinity150LED from
the controller and call the pre programmed program.

5. Part DMX-Assignment.

A TRINITY150LED has 15 és 20 channel modes.
NOTE: Basic knowledge of the DMX512 control standard is required so that the device can be operated and
programmed correctly with a DMX controller
Mode/Channel
DMX DMX
Mode Mode
20CH 15CH
1 1
2
3 2
4
5 3
6 4
7
8 5
9 6
FunKCIÓ ÉRTÉK
PAN 0-255
PAN Fine 0-255
TILT 0-255
TILT Fine 0-255
Pan/Tilt Speed 0-255
Dimmer 0-255
Dimmer Fine 0-255
Strobe 0-3
4-103
104-107
108-207
208-212
213-251
252-255
Farbrad 0-127
128-130
LEÍRÁS
PAN movement
PAN FINE movement
TILT movement
TILT FINE movement
PAN/TILT speed
Dimmer 0-100%
Dimmer fine
Shutter closed
Strobe Effect, from slow to fast
No Strobe Effect (Shutter open)
Pulsing strobe, from slow to fast
No Strobe Effect (Shutter open)
Strobe effect in random mode, from slow to fast
No Strobe effect (Shutter open)
Color position
Color 1
34