involight TRINITY150LED Bedienungsanleitung Seite 31

Scene
Enable
Time
Save DMX
Channel
Pan 0-255
Tilt 0-255
Dimmer 0-255
Strobe 0-255
Color wheel 0-255
Fixed-Gobo 0-255
Rot-Gobo 0-255
Rot-Gobo 0-255
Rot
Prism 0-255
Prism Rot 0-255
Frost 0-255
Focus 0-255
Zoom 0-255
System 0-255
control
With this function you can activate the device.
a) Press the (Enter) key until "Enable" is displayed.
b) Press the ▲ (Up) or ▼ (Down) button until "On" or
"Off" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
With this function you can set the time.
a) Press the (Enter) key until "Time" is displayed.
b) Press the ▲ (Up) or ▼ (Down) button to select the
desired time.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
With this function you can save the DMX values.
a) Press the (Enter) key until "Save DMX" is displayed.
b) Press the ▲ (Up) or ▼ (Down) buttons to confirm or
cancel the DMX storage.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
"Channel control" operating mode
The "Manual control" mode can only be activated if the
device is working alone or is the master in a master-
slave combination. This setting is only relevant if the
device is not controlled by DMX.
a) Press the (Enter) key until "chanel control" is
displayed.
b) To select the desired parameter, press the ▲ (Up) or
▼ (Down) button.
c) Press (OK) to edit the values.
d) Press the ▲ (Up) or ▼ (Down) buttons to select the
value between "0" and "255".
e) Press the (OK) button to confirm and exit the menu.
f) Press the (Return) key to exit the selection without
saving.
30