Connections - Involight Trinity150Led Bedienungsanleitung

Language
System
Display
Backlight Setting
Factory Reset
Device TOU(Min)
Fans Voltage
Error record
About

4.3 Connections:

1. DMX OUT: 3-pin XLR output socket for routing the DMX control signal.
2. DMX IN: -pin XLR input socket for connecting a DMX controller (such as DMX mixer).
3. POWER IN: Powercon compatible AC power input.
4. POWER OUT: Powercon compatible mains power output.
5. ON/OFF SWITCH: ON: power is ON. OFF: Power is OFF.
6. FUSE holder F8A 250V.
When changing the fuse, always disconnect the mains plug and only use the specified fuse types!
Language selection
Invert display (for example in flight operations).
Normal
a) Press the (Enter) key until "Display" appears.
b) To select the desired mode, press the ▲ (Up) or ▼
(Down) button.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Invert
Display lighting (The display goes dark after 15
seconds without pressing a button or is always on.)
Auto
a) Press the (Enter) key repeatedly until the display
shows "Settings".
b) Press the ▲ (Up) or ▼ (Down) button until "On" or
"Off" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
Keep on
saving.
Reset to factory settings
Show device information
Fan voltage information
Error recording information
Displays the current software version
31