Cleaning And Maintenance - EuroLite LED PFE-100 RGBW Profile Spot Bedienungsanleitung

Channel 4 – White
Value :
000 – 255
Channel 5 – RGBW-Colorblend: See Macros-Table at the end of the user manual
Value :
000 – 255
Channel 6 –Color change & Color fade
Value :
000 – 009
010 – 134
135 – 255
Channel 7 –Strobe: with increasing speed
Value :
000 – 009
010 – 255
Channel 8 – Dimmer speed (step response)
Value:
000 – 063
064 – 127
128 – 191
192 – 255
Channel 9 – Dimmer: Increasing brightness
Value:
000 – 255

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
Function:
0 – 100 %
Function:
RGBW-Colorblend
Function:
No function
Color fade with increasing speed
Color change with increasing speed
Function:
No function
0 – 100 %
Function:
Dimmer speed 1
Dimmer speed 2
Dimmer speed 3
Dimmer speed 4
Function:
0 – 100%
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
24/31 00094626.DOC, Version 1.1