FLUX MINIFLUX Originalanhang Seite 16

Attention!



Attention!

Attention!

Attention!

16 / 32
To prevent the pressure line from running dry, use a valve in the
pressure line (e.g. hand nozzle, nonreturn valve, controlled
valve).
If it is ensured that the discharge is always higher than the liquid
level in the tank, there is no need for an additional valve on the
discharge side.
The outlet must be above the level of the suction nozzle of the
pump.
Observe the internal instructions (explosion protection
document).
Observe the Industrial Safety Regulation.
Wear anti-static fabric.
MINIFLUX