Easyclean; System (Oven Cleaning System) - NEFF B 1693 Serie Gebrauchsanweisung

EasyClean

® system:
The oven cleaning function featured in your
oven is intended to help you keep your oven
neat and tidy. An amount of cleaning
solution is vaporised automatically. The
combined effects of heat and steam soften
the soil deposits on the oven wall enamel
and facilitate their removal.
Caution:
Use this function only after the oven has
completely cooled (Room temperature).
Use normal water only, and no distilled
water.
Activate oven cleaning:
1. Remove the baking sheet and the
universal baking pan from the oven. The
baking grill may remain in the oven.
2. Pour approx. 400 ml of water mixed with
a little dishwashing detergent into the
floor pan of the oven cavity.
In the case of heavy soil build-up, you
may wish to allow the cleaning solution
to soak in for a while before you activate
the cleaning function.
3. Close the oven door.
CAUTION:
The oven cleaning function can only
be switched ON when the oven has
cooled down completely.
4. Press the middle of the rotary control
slightly so that the knob pops out.
5. Press the function button for the oven
a
light twice.
The top light of the heating-up
monitor illuminates.
is displayed.
*
If flashes, the oven has not
*
cooled down completely.
When the heating-up time (4 minutes)
has expired, the top light of the
heating-up monitor changes from red
to green. The programme ends after a
further 17 minutes. A signal is emitted.
62
Cleaning and Care
x
Switching OFF:
1. Press the button until
a
the temperature display.
2. Retract the rotary control by applying
slight pressure to the middle of the
knob.
All appliance functions are disabled
when the rotary control is pushed
inwards, with the exception of setting
the time of day.
*
appears in
{{{
Heating-up monitor
(EasyClean ® system)