Before Using Your Appliance For The First Time; Setting The Time Of Day; Preliminary Cleaning; Initial Burn-In - NEFF B 1693 Serie Gebrauchsanweisung

Before Using Your Appliance for the First Time

Time of day
Before you use your appliance for the
first time, it is necessary to set the
current time on the electronic timer.
After connecting to the mains, or after a
power failure, the display
Setting the time:

Setting the time of day:

1. Press the middle of the rotary control so
that it pops out.
+
2. Press the button for setting the time
of day.
The arrows above the rotary control
flash.
Acknowledgement signal
It is possible to set the appliance so that
an acknowledgement signal is heard
every time a button is pressed.
To activate the signal:
The rotary control must be pressed in.
v 0
1. Press the and
simultaneously for approx. 10 seconds
until appears in the display.
Å | |
2. Press any of the buttons to confirm the
setting.

Preliminary cleaning:

1. Clean the appliance exterior with a soft
moistened cloth.
2. Clean the oven and the accessories with
a hot detergent solution.
44
will blink.
{:{{
buttons
Note: The time cannot be set if an
automatic function is active (see Electronic
clock for cancelling automatic function).
3. Turn the rotary control to set the time of
day (e.g. Uhr).
| Å:{{
The time setting has been
programmed as soon as the light
illuminating the arrows above the
rotary control goes out.
To cancel the signal:
The rotary control must be pressed in.
v 0
1. Press the and
simultaneously for approx. 10 seconds
until appears in the display.
Å{{
2. Press any of the buttons to confirm the
setting.

Initial burn-in:

1. Heat the empty oven for approx.
30 minutes.
Select top and bottom heat at a setting
of 240° C.
During the initial burn-in phase, please
open the kitchen windows to dissipate
unpleasant odours.
buttons