Controls
What happens on the appliance when this setting is on:
The fridge section is switched off.
-
The internal light is on.
-
-
Reminders and warnings are not shown. There is no
acoustic signal.
Activating/deactivating settings
u Activating/deactivating the setting (see 6.2 Control
concept) .
w On: fridge section is off. Light stays on.
w Off: preset temperature is restored.
After 60 min the setting turns off automatically. The appli‐
ance then continues running in normal mode.
Brightness
Set the brightness level of the display.
The following brightness values can be set:
1 = 40%
-
2 = 60%
-
-
3 = 80%
4 = 100%
-
Choose the setting
u Set the level (see 6.2 Control concept) .
Door alarm
Set the time before the door alarm sounds.
The options are as follows:
1 min
-
2 min
-
-
3 min
Off
-
Choose the setting
u Set the time (see 6.4 Fault messages) .
Appliance information
This setting allows the appliance information to be read out
as well as access to the customer menu.
It provides the following information:
-
Model name
Index
-
-
Serial number
-
Service number
Show appliance data
u Press the navigation arrows Fig. 5 (1) repeatedly until the
settings
are displayed.
u Press Confirm Fig. 5 (2).
u Tap the navigation arrows Fig. 5 (1) repeatedly until the
appliance information is displayed.
u Read the appliance info.
68
Demo mode
Demo mode is a special feature for dealers who want to
demonstrate appliance features. If you activate demo mode,
all refrigeration functions are deactivated.
If you switch on your appliance and "Demo" appears in the
status display, then demo mode is already activated.
If you activate and then deactivate demo mode, the appli‐
ance will be reset to factory defaults. (see Reset)
Activating demo mode
Fig. 11
Fig. 12
u Carry out action steps according to the illustration.
w Demo mode is activated.
w Appliance is switched off.
u Switch on the appliance. (see 3.1 Switching on appliance)
w "DEMO" appears in the status display.
Deactivating demo mode
Fig. 13
* Depending on model and options