Functioning; Alarm And Indication Sounds - Abus Rwm450 Bedienungsanleitung

METHOD OF FUNCTIONING
Heat warning function:
• Heat warning function is triggered
at 60°C
• Single beep every second

ALARM AND INDICATION SOUNDS

Indication sounds:
When the device is activated a
simple sound is emitted once
(short beep)
Volume:
Cause: Activation sound
Indication sounds:
When the Test/Stop button is pressed
a single sound (long beep) is issued.
Volume:
Cause: Test sound
Alarm sounds:
A two-part signal is issued (short
beep followed by longer beep)
every second.
0,5 seconds
Volume:
Cause: Smoke alarm
Alarm sounds:
A single tone is issued every second
(short beep).
1 second
Volume:
Cause: Temperature alarm
Silencing the alarm sounds
All alarm sounds can be temporarily
deactivated by pressing the Test
Stop button (Fig. 1, item d) (smoke
– 38 –
alarm and temperature alarm:
10 min.).
Indication sounds:
A single tone is issued every 90
seconds (short beep).
90 seconds
Volume:
Cause:
Low battery warning
If the smoke alarm issues one of the
two indication sounds described above,
the device will remain capable of
providing its warning function for a
maximum of 60 days and must
therefore be replaced before this
remaining 60-day period expires.
Indication sounds:
A double tone is issued every 90
seconds (short beeps).
90 seconds
10 min
Volume:
Cause: Device is
contaminated
Silencing the
indication sounds:
All indication sounds can be tempo-
rarily deactivated by pressing the
Test / Stop button (Fig. 1, item d)
(low battery and contamination
indications: 24 hours).
Damage to the device invalidates
the warranty and guarantee
Do not immerse the
unit in water.
No battery replacement
is possible (see
"General Safety
Information").
This is a sealed system; only the
cover can be changed.
Press cover to silence
the signal.
– 39 –
24 h
GB