Self-Diagnosis Display - Sony Ruvi CCD-CR1E Bedienungsanleitung

Self-diagnosis display

The camcorder has a self-diagnosis display.
This function displays the camcorder's
condition with five digits (a combination of a
letter and figures) on the LCD screen. If this
occurs, check the following code chart. The
five-digit display informs you of the
camcorder's current condition. The last two
digits (indicated by ππ) will differ depending
on the state of the camcorder.
Five-digit display
C:31:ππ
C:32:ππ
E:61:ππ
E:62:ππ
If you are unable to resolve the problem, contact local authorized Sony service facility.
LCD screen
Self-diagnosis display
•C:ππ:ππ
You can service the camcorder yourself.
•E:ππ:ππ
Contact local authorized Sony facility.
Cause and/or Corrective Actions
• A serviceable situation not malfunctioned above has
occurred.
m Turn off the camcorder once and turn it on again, then
operate the camcorder.
m Change the power source, then operate the camcorder.
m Leave the camcorder for about 1 hour, then operate the
camcorder.
• A camcorder malfunction which you cannot correct has
occurred.
m Contact your local authorized Sony service facility and
inform them of the five digits. (example: E:61:10)
C:31:00
35
EN