Maintenance And Care; Cleaning The Drip Tray And The Coffee Grounds Container - Saeco Incanto HD8911 Bedienungsanleitung

2
1

Maintenance and care

Cleaning the drip tray and the coffee grounds container

1
1
2
Note: You can only adjust the grinder settings when the machine is grinding
coffee beans.
1 Place a cup under the coffee dispensing spout.
2 Open the lid of the bean hopper.
3 Press the ESPRESSO button.
4 When the grinder starts grinding, place the grinder adjustment key on the
grinder adjustment knob (1). Push and turn to the left or to the right (2).
- There are 5 different grinder settings you can choose from. The smaller
the dot the stronger the coffee.
Caution: Do not turn the grinder adjustment knob more than one notch at
a time to prevent damage to the grinder.
Note: The difference becomes noticeable after you have brewed 2-3 cups
of coffee at the new setting.
Maintenance of your machine is important to prolong the life of your
machine and to ensure optimum quality and taste of your coffee.
Perform the following actions while the machine is switched on:
- When the display shows the 'empty coffee grounds container' icon,
empty the coffee grounds container.
- The drip tray is full when the drip tray full indicator pops up through the
drip tray. Empty and clean the drip tray every day.
1 Turn the classic milk frother to the left.
2 Press the release buttons on both sides of the drip tray (1) and pull the
drip tray out of the machine (2).
3 Remove and empty the coffee grounds container.
4 Empty and rinse the drip tray under the tap.
5 Place the coffee grounds container back in the drip tray.
6 Slide the drip tray back into the machine until it locks into position with a
click.
Note: Make sure that the machine is still switched on when you remove the
drip tray. If you switch off the machine before you remove the drip tray, the
'empty coffee grounds container' icon will be visible on the display when
you switch on the machine again, even though the drip tray is empty.
English
21