Measuring The Water Hardness; Setting The Water Hardness - Saeco Incanto HD8911 Bedienungsanleitung

English
16
DESCALE BEFORE
ACTIVATING FILTER

Measuring the water hardness

1 2
3
4
numbers of red squares
1
2
3
4

Setting the water hardness

-
The display tells you that you need to descale the machine before
activating the new filter.
2 Press the OK button to start the descaling procedure. See chapter
'Descaling procedure'.
-
Press the ESC button several times to leave the filter menu if you do
not want to descale right away.
3 At the end of the descaling procedure, the display asks you if you want
to install the AquaClean filter.
-
Follow the steps in 'Replacing the AquaClean filter'.
To be able to adjust the machine settings to the water in your region, please
measure the water hardness with the water hardness strip supplied.
1 Immerse the water hardness test strip (supplied with the machine) in tap
water for 1 second.
2 Remove the water hardness strip and and wait for 1 minute.
3 Check how many squares have changed into the red colour and check
the water hardness in below table.
value to be set
1
2
3
4
Setting the water hardness
1 To set the water hardness, press the MENU button, select menu and
scroll to select WATER HARDNESS.
water hardness
very soft water
soft water
hard water
very hard water