Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fault and troubleshooting
Fault/cause
Speaker stand wobbles
Extension tube slides in
under a load
Speaker cannot be placed
on expanding mandrel
Speaker is not adequately
fixed in place
Speaker is difficult to remove
from expanding mandrel
Storage, disposal
Store the speaker stand in a dry place.
Recycle disassembled components:
u Scrape all components made of metal.
u Recycle or reuse all plastic, paper, and cardboard components.
u Sort all other components according to material composition and dispose of them
u
according to local regulations.
Contact information
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Telefon: +49 9342/8060
Telefax: +49 9342/806-150
E-Mail: contact@k-m.de
Web: www.k-m.de
24633-000-55 Rev.01 03-80-969-00 1/24
Check/Remedy
● Check the stability of the speaker stand.
● Check the screw fitting between the base and the tube com-
●
bination as well as the clamping nut SW40 and tighten if
●
necessary.
● Secure the safety hook in place.
● Tighten the clamping screws.
● Check flange bushing diameter.
● Check whether the clamping sleeve is in the open position.
● Check flange bushing diameter.
● Check whether the clamping sleeve is in the open position.
Werbung
Inhaltsverzeichnis
