Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance, cleaning and repair
u Maintenance: Regularly check if the screw connections are tight.
u Cleaning: Use a slightly damp cloth to clean the desktop camera stand.
u
Do not use chlorinated or abrasive cleaning agents. These will cause damage to the surface
u
and varnish.
u Repair: Immediately repair any damage that occurs and stop using the desktop camera stand.
u
Maintenance work may only be carried out if you have the necessary knowledge. If any parts
u
are missing, contact the manufacturer at www.k-m.de. Here you can find a corresponding
u
spare parts list by entering the article number on the type label. Use this page to reorder
u
missing or damaged components.
Fault and troubleshooting
Fault/cause
Stand wobbles
Equipment wobbles on
universal joint
Storage, disposal
Store the desktop camera stand in a dry place.
Recycle disassembled components:
u Scrape all components made of metal.
u Recycle or reuse all plastic, paper, and cardboard components.
u Sort all other components according to material composition and dispose of them
u
according to local regulations.
Contact information
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: 09342/8060
Fax: 09342/806-150
E-Mail: contact@k-m.de
Web: www.k-m.de
19783-100-55 Rev.07 03-80-048-00 5/21
Check/Remedy
● Check the surface for dirt or unevenness.
● Check screw connections for tightness and tighten if
●
necessary.
Werbung
