Miele PDR 914 HP Kurzgebrauchsanweisung Seite 150

en - Installation
150
y 906 mm
To facilitate any future maintenance work, a maintenance corridor

with a width of at least 500 mm must be set up behind the machine
and must be accessible at all times. The distance between the ma-
chine and any walls must not fall below the specified minimum val-
ues.
Adjust the heat-pump dryer screw feet until the machine is level.

After the machine has been aligned, screw the washers tightly to the
base plate using a screwdriver.
Tip: Use a spirit level to ensure correct alignment.
x
1400 mm
z
PDR 914: 1210 mm / PDR 918:
1413 mm / PDR 922: 1522 mm