Werbung
Verfügbare Sprachen
Verfügbare Sprachen
14. On the opposite side remove the hole
covers by driving a 3-4 mm drift or drill
into them.
15. Install the handle.
16. Install the hole covers provided within
the accessory bag.
17. Put the cabinet in position.
9. NOISES
There are some sounds during normal running (compressor, refrigerant circulation).
OK
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
Do a final check to make sure
that:
• All screws are tightened.
• The magnetic seal
adheres to the cabinet.
• The door opens and
closes correctly.
If the ambient temperature is
cold (i.e. in Winter), the
gasket may not fit perfectly to
the cabinet. In that case, wait
for the natural fitting of the
gasket. In case you do not
want to carry out the above
mentioned operations,
contact the nearest After
Sales Service Force. The
After Sales Service specialist
will carry out the reversibility
of the doors at your cost.
HISSS!
ENGLISH
75
BRRR
!
Werbung
