Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Some functional problems
might occur for some types
of models when operating
outside of that range. The
correct operation can only be
guaranteed within the
specified temperature range.
If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer
service or to the nearest
Service Centre
8.2 Location
To ensure best performance, if the
appliance is positioned below an
overhanging wall unit, the minimum
distance between the top of the cabinet
and the wall unit must be at least 40 mm.
Ideally, however, the appliance should not
be positioned below overhanging wall
units.
The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top
cupboard must be at least 50 mm
deep.
8.3 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
• The manufacturer declines all
• This appliance complies with the E.E.C.
8.4 Removing the transport
support
Your appliance is equipped with transport
support to secure the door during
transportation.
1. Open the door.
2. Remove the transport support from
3. Remove the transport support from
50 mm
8.5 Rear spacers
Install the spacers provided within the
accessory bag as shown in the figure.
Install the spacers on the back side of the
panel.
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
responsibility if the above safety
precautions are not observed.
Directives.
the door sides.
the lower hinge (some models).
CAUTION!
Some models are fitted with a
silencing pad under the
cabinet. Do not remove this
pad.
3
ENGLISH
73
2
Werbung
