Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control Set
GB+USA
1 The Control Set
With this fischertechnik infrared (IR) remote control, the versatile functions of fishertechnik models are now even easier to control.
The control set consists of a high-performance transmitter, a microprocessor-controlled receiver, and a servo. The receiver must be
installed directly into the model and can then be connected to the servo and up to three motors or lamps. The speed of the motors
and the servo pulse are infinitely adjustable.
The range of the transmitter in closed areas is above 10 meters.
Parts Included in Purchase
2 The Transmitter
Power Supply
A 9V battery is required for the operation of the transmitter (6F22, not included in this package). No other types of power supply
may be used.
View Transmitter (Fig. 1, Pg. 1)
D Left Joystick (3)
The left joystick controls outputs M1 and M2 of the receiver. If you move the joystick forward, motor M1 spins in one direction; if
you move the joystick backward, the motor spins in the opposite direction. The motor's rotational speed changes depending on how
far forward or backward the joystick is moved. The same applies for the left and right movement of the joystick for motor M2.
D Right Joystick (6)
The right joystick controls output M3 and the servo output of the receiver. To control output M3, move the right joystick forward and
backward. If you move the joystick leftor right,then the servo movesin the respective direction. Thiscan be used tobuild anexcellent
steering mechanism for a vehicle.
An example of such an assembly can be found on pg. 2 (Figs. 3 and 4).
D LED (5)
The operation display LED is lit, if the transmitter is turned on, and it flashes, if the transmitter is sending data.
10
133 053
1x
503 146
1 x
132 292
1 x
132 290
1 x
132 004
1 x
31 336
1 x
31 337
1 x
37 468
2 x
38 240
2 x
Werbung
