Beko HCA62640WH Bedienungsanleitung Seite 15

5 Installation of appliance
(Figure 2-90)
5.4 Boring the hanger holes
Affix the installation template onto the installation
place of the hood. Drill the points market with (X,Y)
using a Ø8 mm bit and points market with (Z) us-
ing a Ø6 mm bit. (Figure 3)
8
8 mm plastic
8
wall plug
Cooker Hood / User Manual
Z
Z
Y
Y
X
8
X
6 mm plastic
wall plug
Z
Y
X
Bottom surface of the appliance
COOKING ZONE
(Figure 3)
5.5 Hammering the wall plugs
Hammer Ø8 mm wall plugs (X,Y) into the holes
drilled for hanger screws. Hammer 2 x Ø6 mm wall
plugs (Z) into the holes drilled with a Ø6 mm bit for
the external flue connection plate. (Figure 3)
5.6 Installing the hanger screws
Install 4.9x50 hanger screws into the Ø 8 mm wall
plugs (Y) you have hammered into the wall. There
must be a gap of 5 mm between the screw head
and the wall. Connect the internal flue connection
plate to the 8 mm wall plugs (Z) on the wall using
Ø3.9x22 screws. (Figure 4)
15 / EN