Troubleshooting; Malfunction Causes And Remedies; Storage/Disposal; Storage - Silvercrest TLGL 1000 B1 Bedienungsanleitung

Troubleshooting

In this section you will receive important information for the localisation and
remedying of malfunctions.

Malfunction causes and remedies

The following table will help with localising and remedying minor malfunctions:
Defect
The battery
charger is not
functioning.
The inserted
batteries are not
being charged.
NOTICE
► If you cannot solve the problem with the aforementioned methods, please
contact Customer Services.

Storage/Disposal

Storage

If you do not intend to use the device for a longer time, remove the batteries and
store it in a clean, dry place away from direct sunlight.
│ GB │ IE
■ 10
Possible cause
The power cable is not
plugged in.
Mains power socket is not
supplying power.
The batteries are not inserted
as per their polarity.
The inserted batteries are
not suitable for charging.
The temperature monitoring
was initiated.
Solution
Insert the power cable into a mains
power socket.
Check the circuit fuse.
Insert the batteries as per their polarity
(see marking in the charging slot).
Match the charging contacts to the
positions of the positive and negative
terminals on your Li-ion battery.
Observe the labelling on the Li-ion
battery.
Insert only rechargeable Ni-Cd and
Ni-MH batteries of the types AAA/
AA/C/D and 3.6 - 3.7V Li-ion
batteries.
Disconnect the plug from the mains
power socket and allow the device to
cool down.
TLGL 1000 B1