Werbung
EN
ORIGINAL INSTRUCTIONS
Safety, performance, and dependability have been given top
priority in the design of your mud mixer.
INTENDED USE
The mud mixer is intended to be used only by adults who
have read and understood the instructions and warnings
in this manual, and can be considered responsible for their
actions.
The product is intended for mixing thinset, grout, mortar,
paint, drywall mud, concrete, and leveling compounds.
The product is intended for consumer use only.
Do not use the product for any other purpose. Use of the
product for operations diff erent from intended could result in
a hazardous situation.
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
MUD MIXER SAFETY WARNINGS
■
Hold the tool with both hands at the intended
handles. Loss of control can cause personal injury.
■
Ensure sufficient ventilation when mixing flammable
materials
to
avoid
Developing vapour may be inhaled or be ignited by the
sparks the power tool produces.
■
Do not mix food. Power tools and their accessories are
not designed for processing food.
■
Ensure that the mixing container is placed in a firm
and secure position. A container that is not properly
secured may move unexpectedly.
■
Follow the instructions and warnings for the material
to be mixed. Material to be mixed may be harmful.
■
Do not reach into the mixing container with your
hands or insert any other objects into it while
mixing. Contact with the mixer basket may lead to
serious personal injury.
■
Start up and run down the tool in the mixing
container only. The mixer basket may bend or spin in
an uncontrolled manner.
ADDITIONAL SAFETY WARNINGS
■
Dust created by operating the product can cause
respiratory injury. Wear appropriate dust control mask
with filters suitable for protecting against particles from
the material being worked on.
■
Do not switch on the product again after it has stalled.
Switching it on again, can cause a kickback with high
reaction force. Determine why the product has stalled
and rectify it, paying heed to the safety instructions. If
necessary, remove the insertion tool.
■
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
■
Ambient temperature range for tool during operation is
between 0 °C and 40 °C.
■
Ambient temperature range for tool storage is between
0 °C and 40 °C.
■
The recommended ambient temperature range for the
charging system during charging is between 10 °C and
38 °C.
a
hazardous
atmosphere.
ADDITIONAL BATTERY SAFETY WARNINGS
■
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack, or charger in fluid or allow fluid to
flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.
■
Ambient temperature range for battery during use is
between 0 °C and 40 °C.
■
Ambient temperature range for battery storage is
between 0 °C and 20 °C.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
KNOW YOUR PRODUCT
See page 47.
1. Switch trigger
2. Three-speed switch
3. Handle, insulated gripping surface
4. Battery port
5. Lock-out button
6. Chuck key
7. Two-speed gear knob
8. Chuck
9. Operator's manual
10. Mixing paddle
11. Battery pack
12. Charger
OPERATIONS
TWO-SPEED GEAR KNOB
■
Select low speed for applications that require high power
and torque, such as starting a mix and mixing thick
materials.
■
Select high speed for well-combined mixtures and thin
materials.
THREE-SPEED SWITCH
The speed selection, material type, and mixing time aff ect
the consistency and density of the material being mixed. Set
the three-speed switch according to the preferred speed:
■
Press 1 for low speed.
■
Press 2 for medium speed.
■
Press 3 for high speed.
MAINTENANCE
■
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
■
When servicing, use only original manufacturer's
replacement parts, accessories, and attachments. Use
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
3
Werbung
