Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning with the brush
Remove the outer foil section.
(See this page.)
Clean the system outer foil in the areas
indicated by the circles every time you
use the shaver. Otherwise, abnormal
sound may be generated.
►Cleaning with the long brush
Clean the foil frame [A3],
system outer foil [A2], the
main body [A] and the
trimmer [A] using the
long brush.
Replacing the system outer foil
appears on the lamp display once every 18 months.
(Based on one 3‑minute shave use per day)
We recommend checking the system outer foil when it
appears.
Press the power switch for more than 30 seconds to
turn off
.
Even if
is not turned off right after the replacement, it
will automatically turn off within approximately 7 uses.
system outer foil
once every 18 months
►Removing the outer foil section
Press the foil frame release buttons [A5]
and lift the outer foil section [A] upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section
[A] to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons [A] and pull down the
system outer foil [A2].
• Do not press the system outer foil
release buttons with excessive
force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
2. Align the foil frame mark (
mark ( ) and securely attach together until it clicks.
Note
Do not throw away the foil frame.
) to the
) and the system outer foil
21
Werbung
