Panasonic ES-LS9A Bedienungsanleitung Seite 18

Trimming sideburns
►Switching the shaver head
You can change the pivot action.
" "
The shaver head is moved to
prevent missed spots.
" "
You can lock the shaver head.
18
Pre‑shave of long beards
Cleaning, drying, charging
We recommend cleaning the shaver after each use.
1
Insert the shaver into the
self-cleaning recharger
[B] and plug the adaptor
[C] into a household
outlet� (See page 14�)
• Check that the charge status
lamp ( ) is glowing.
• When the LOW lamp or the
STATUS lamp lights up, see
page 23.
2
Press �
The CLEAN lamp and the DRY lamp glow, and the
"AUTO" mode will start after approximately 6 seconds.
• It is not possible to change the mode after the
"AUTO" mode has started.
Clean
10 min
* When the ambient temperature of the self‑cleaning
recharger is low (approx. 15 °C or lower), the
drying process will take up to 170 min.
3
Remove the adaptor after the selected
mode is completed�
1
1
2
Dry Charge
80 min* 0 to 60 min