Herunterladen Diese Seite drucken

Bcube A8 Plus Bedienungsanleitung Seite 49

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INERACTIVE TRAINING (OPTIONAL)
equipped with Bluetooth technology can be connected to compatible fitness apps. The "Kinomap" and
Fitness devices
"Fitshow" programs are currently available for iOS and Android
PROBLEMS AND REMEDIES
PROBLEM
Power cable is not plugged in
The On/Off switch is not set to On
The house fuse has jumped out
The cable in the right-hand upright has sheared
off at the top or bottom
The treadmill will not
The emergency stop safety key is not positioned
start
correctly on the console
The fuse of the device is defective
The connection cable from the controller to the
console has become detached from the controller
Transformer is not connected correctly or is
defective
The motor switches off due to overload
The treadmill suddenly
stops
Electronics problem
The treadmill jerks
Running mat is too loose and slips through
when running
The treadmill does not
The treadmill is not correctly aligned
run in the center
Motor drive belt does not run centrally on pulley
Treadmill squeaks
of front idler pulley
without load (without
runner)
Drive belt defective
B
1.
Download the desired app to your mobile device
2.
Register according to the specifications of the respective app
3.
Activate Bluetooth in the settings of your mobile device
4.
Switch on your fitness device
5.
Open the corresponding app
6.
Select your device type
7.
Select the brand of your fitness device
8.
Select the PROGRAM of your fitness device
9.
Connect the device to your mobile device via the app
POSSIBLE CAUSES
48
OPERATING INSTRUCTIONS
REMEDY
Plug in the mains cable
Set the on/off switch to On
Check the house fuses
Check the cable connection using the assembly instructions
Remove and reposition the emergency stop safety key
Replace the fuse of the device
Check the plug connection on the controller in the engine
compartment
Check transformer in engine compartment and replace if
necessary
Check the lubrication and tension of the running mat as
described in the assembly instructions
Check power supply as described above
Readjust the running mat tension as described in the
assembly instructions
Center the running mat as described in the assembly
instructions
Aligning the drive belt
Replacing the drive belt

Werbung

loading