Werbung
Verfügbare Sprachen
Verfügbare Sprachen
B
OPERATING INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Before you start assembling the treadmill, please check that all the specified parts are present. Some of the assembly steps
require heavy lifting. It is recommended that you are assisted by another person when setting up this product.
Step 1: Lift the machine out of the packaging box and place it on a flat floor (as shown in the illustration), remove all PE bags
and packaging tape wrapped around the machine!
.
Step 2: Place the left front support (62) in the holder on the base frame (1) and screw it in place using 2x M8×50×20 hexagon
head screws (103) from the inside and 2x M8*15 hexagon head screws (104). Repeat the process for the right front support
(63) and connect the communication cable - Caution! Do not pinch the communication cable during installation
62
63
104
104
103
103
1
37
Werbung
