Toro Recycler 20961 Bedienungsanleitung Seite 13

Figure 18
1. Bag-on-demand lever (in the bagging position)
•
To recycle or side-discharge the grass and leaf
clippings, press the button on the lever and move the
lever rearward until the button on the lever pops up.
Important: For proper operation, shut off the
engine, wait for all moving parts to stop, and then
remove any grass clippings and debris from the
bag-on-demand door and the surrounding opening
(Figure 19) before you move the bag-on-demand
lever from 1 position to another.
Figure 19
1. Clean here
Side-Discharging the
Clippings
Use side-discharging for cutting very tall grass.
If the grass bag is on the machine and the bag-on-demand
lever is in the bagging position, move the lever to the recycling
position; refer to Operating the Bag-on-Demand Lever (page
11).
Installing the Side-Discharge Chute
Lift up the side door and install the side-discharge chute
(Figure 20).
g198723
Removing the Side-Discharge Chute
To remove the side-discharge chute, lift up the side door,
remove the side-discharge chute, and lower the side-discharge
door.
Storing the Machine in the
Vertical-Stow Position
During the mowing season or in the off-season, you can store
your machine in the vertical position to minimize storage
space.
g198734
12
Figure 20
g024439