Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Front Panel
8
Fig. 1-2: Front View
[1] POWER Indicator
The green lamp lights up when the power is turned on.
[2] Busy Indicator
The orange lamp lights up when the disk drive is accessing or writing
data. This lamp will also flash on and off at 1.2-second intervals when the
unit becomes hot.
[3] Disk Insertion Slot
Insert the disk cartridge into this slot. Refer to the section "How to Use the
Disk Unit" on page 14 for more information.
[4] Emergency Eject Hole
If the disk cartridge cannot be ejected using the eject button, turn off the
power and insert the supplied emergency eject tool (or a paper clip) into
this hole to trip the emergency eject mechanism. Refer to the section
"What to Do if the Disk Does Not Eject" on page 16 for further details.
[5] Eject Button
Press this button to eject the disk cartridge from the drive.
The eject button is disabled when the DIP switch or software settings
prohibit ejection.
Chapter 1 Introduction
Werbung
