Setting The Dip Switches; Setting The Disk Unit's Functions; Eect Eeeeee Tree Teeeie Tees Teeeneneneneeees - Sony Rmo-S550 Bedienungsanleitung

Setting the DIP Switches
DIP switches A, B and E are used to set the RMO-S550's functions and
switches 4, 2 and | are used to set the unit's SCSI ID address.
Setting the Disk Unit's Functions
Use DIP switches A, B and E to select the RMO-S550's functions in
accordance with the host computer and software you are using.
Be sure to turn off the power before setting the switches.
Keep DIP switches C and D set to ENABLE (down).
oo en le RE lt a
ABCDE4 21
—0-0-0-0-0
itn tii eal SCSEID
| AUTO SPIN UP
PARITY
Fig. 2-3: DIP Switches
Table 2-1: DIP Switch Settings
DISABLE ENABLE
Inserting a disk
provokes the spindle
motor to rotate.
DIP switch
(from left to right)
Inserting a disk does
not invoke the spindle
motor to rotate.
A AUTO SPIN UP
Disk cartridge cannot
be ejected by pressing
the eject button.
C Reserved (Do not = ee: eee
change this setting.) ;
Disk cartridge can be
ejected by pressing
the eject button.
B MANUAL EJECT
D Reserved (Do not
change this setting.)
DISABLE: up ENABLE: down Default settings
12 Chapter 2 Getting Started